****  TRADITIONAL / VINTAGE BROADHEADS  ****

*****************************

Note: Arrows & Broadheads Identified on this Site with ABCC Numbers are in Reference to those established by the American Broadhead Collector's Club

****    H thru M    ****

****    ****    ****    ****    ****    ****    ****

HAWKEYE Broadheads were manufactured by the Hawkeye feather Co. of Salem, Oregon during the late 1950's, being available in a variety of different colors including black, white, gray, yellow, marbled and bronze ~

****    ****    ****    ****

1959 HAWKEYE  Nylon 4 ~ Small Game ~ (4-Blade) BROADHEAD ~ #ABCC0575.000 ~ Length: 2.31" ~ mx-52 ~ (5) ~ Item # vbhh-026 ~ ($35.)

************************************************************************

The HELIX SPIRAL Broadheads were produced by Bob Casperson (Casperson Die Co.), and Larry Becker in Madison, Wisconsin during the mid 1940's until the mid 1950's.  The design of this broadhead caused it to rotate in flight ~

****    ****    ****    ****

1950 HELIX SPIRAL  (Spirals in Flight) BWS ~ (2-Blade) BROADHEAD ~ #ABCC0590.000 ~ Length: 2.60" ~ mx-32 ~ (3) ~ Item # vbhh-038 ~ ($55.)

************************************************************************

The HERPIN Broadhead was manufactured by Ivy Herpin (Herpin Tool and Die Co.) of Dallas, Texas during the early 1950's.  It is said that Ivy learned that his no-rust (plastic) ferrule became brittle and shattered upon impact during an Idaho Elk hunt, and stopped manufacturing and selling these broadheads, which had been available in four different colors: black, white, red and green

****    ****    ****    ****

1952 HERPIN  B-1 Tanged ~ (2-Blade) BROADHEAD ~ #ABCC0602.000 ~ Length: 3.01" ~ mx-13 ~ (1) ~ Item # vbhh-044 ~ ($45.) ~ SOLD ~ (A.A.)

************************************************************************

HERTER'S Broadheads were manufactured and marketed by the well-known Herter's Outdoor Sporting Co. of Waseca, Minnesota during the 1950's & 1960's, with certain models being produced in Japan ~

****    ****    ****    ****

1961 HERTER'S ~ (2-Blade) BROADHEAD ~ #ABCC0604.000 ~ Length: 2.58" ~ mx-22 ~ (2) ~ Item # vbhh-046 ~ ($35.)

************************************************************************

1960 HERTER'S ~ with Aluminum Ferrule ~ (4-Blade) BROADHEAD ~ #ABCC0608.000 ~ Length: 2.53" ~ (7) ~ Item # vbhh-050 ~ ($25.)

************************************************************************

1965 HERTER'S ~ (4-Blade) "Take Apart" BROADHEAD ~ #ABCC0610.000 ~ Length: 2.59" ~ (2) ~ Item # vbhh-052 ~ ($30.)

************************************************************************

1965 HERTER'S ~ (4-Blade) "Steel Ferrule" ~ "Take Apart" BROADHEAD ~ #ABCC0610.100 ~ Length: 2.57" ~ (1) ~ Item # vbhh-053 ~ ($35.)

************************************************************************

1965 HERTER'S ~ (4-Blade) "Steel Ferrule" ~ "Take Apart" BROADHEAD ~ #ABCC0611.000 ~ Length: 2.65" ~ (5) ~  Item # vbhh-054 ~ ($35.)

************************************************************************

1965 HERTER'S Magnum ~ (2-Blade) BROADHEAD ~ #ABCC0612.000 ~ Length: 2.63" (4) ~ Item # vbhh-055 ~ ($30.)

************************************************************************

1965 HERTER'S Magnum ~ (2-Blade) BROADHEAD ~ #ABCC0613.000 ~ Length: 2.58" ~ (4) ~ Item # vbhh-056 ~ ($35.)

************************************************************************

1965 HERTER'S Magnum ~ (2-Blade) BROADHEAD ~ #ABCC0614.000 ~ Length: 2.62" (2) ~ Item # vbhh-057 ~ ($35.)

************************************************************************

1966 HERTER'S Ram MX Proto ~ (4-Blade) BROADHEAD  ~ #ABCC0616.000 ~ Length: 2.56" ~ (1) ~ Item # vbhh-059 ~ ($35.)

************************************************************************

1966 HERTER'S Ram MX Proto ~ (4-Blade) BROADHEAD  ~ #ABCC0617.000 ~ Length: 2.50" ~ (4) ~ Item # vbhh-60 ~ ($35.)

************************************************************************

Vintage HERTER'S Ram MX #1 ~ (4-Blade) BROADHEAD ~ #ABCC0618.000 ~ Length: 2.63" ~ (5) ~ Item # vbhh-061 ~ ($35.)

************************************************************************

Vintage HERTER'S Ram MX #2 ~ (4-Blade) BROADHEAD  ~ #ABCC0620.000 ~ Length: 2.63" ~ (8) ~ Item # vbhh-063 ~ ($35.)

************************************************************************

Vintage HERTER'S Ram MX #2 ~ (4-Blade) BROADHEAD ~ #ABCC0621.000 ~ Length: 2.63" ~ (5) ~ Item # vbhh-064 ~ ($25.)

************************************************************************

1976 HERTER'S Ram MX #3 ~ (4-Blade) BROADHEAD ~ #ABCC0622.000 ~ Length: 2.67" ~ mx-5 ~ (106) ~ Item # vbhh-065 ~ ($15.)

************************************************************************

Vintage HERTER'S Professional FIELD TIP ~ Length: 1.45" ~  127 Grain ~ (1) ~ Item # vbhh-066 ~ ($25.)

************************************************************************

HI-PRECISION Broadheads were manufactured by the Hi-Precision Co. of Orange City, Iowa, which produced some of the smallest and largest 3-blade broadheads during the early 1950's thru the 1960's

****    ****    ****    ****

1953 HI-PRECISION ~ (3-Blade) BROADHEAD  ~ #ABCC0626.000 ~ Length: 1.80" ~ (11) ~ Item # vbhh-068 ~ ($20.)

***********************************************************************

1953 HI-PRECISION ~ (3-Blade) BROADHEAD  ~ #ABCC0627.000 ~ Length: 1.87" ~ (3) ~ Item # vbhh-069 ~ ($20.)

***********************************************************************

1953 HI-PRECISION ~ (3-Blade) BROADHEAD  ~ #ABCC0628.000 ~  Length: 1.78" ~ (5) ~ Item # vbhh-070 ~ ($20.)

***********************************************************************

1956 HI-PRECISION ~ (3-Blade) BROADHEAD  ~ #ABCC0629.000 ~ Length: 1.88" ~ mx-5 ~ (21) ~ Item # vbhh-071 ~ ($20.)

***********************************************************************

1953 HI-PRECISION ~ (3-Blade) BROADHEAD ~ #ABCC0630.000 ~ Length: 1.83" ~ (4) ~ Item # vbhh-072 ~ ($20.)

**********************************************************************

1956 HI-PRECISION ~ (3-Blade) BROADHEAD  ~ #ABCC0631.000 ~ Length: 1.93" ~ (3) ~ Item # vbhh-073 ~ ($20.)

***********************************************************************

1961 HI-PRECISION ~ (3-Blade) BROADHEAD  ~ #ABCC0635.000 ~ Length: 2.21" (10) ~ Item # vbhh-077 ~ ($20.)

***********************************************************************

1961 HI-PRECISION ~ (3-Blade) BROADHEAD  ~ #ABCC0636.000 ~ Length: 2.23" ~ (89) ~ Item # vbhh-078 ~ ($20.)

***********************************************************************

RARE  1953 HI-PRECISION ~ (3-Blade) BROADHEAD ~ with only 1 Glue Hole instead of normal 2 Holes ~ Length: 1.78"  ~ (1) ~ Item # vbhh-079 ~ ($55.)

***********************************************************************

RARE  1956 HI-PRECISION ~ (3-Blade) BROADHEAD ~ No "H" on Ferrule ~ Length: 1.89" ~ (1) ~ Item # vbhh-080 ~ ($55.)

***********************************************************************

HILBRE Broadheads were designed and produced by H.C. Stockfleth of Chatham, New Jersey during the 1950's thru the 1960's

****    ****    ****    ****

1954 HILBRE ~ BARBED ~ (2-Blade) BROADHEAD BLADE  ~ #ABCC0637.000 ~ Length: 2.75" ~ (1) ~ Item # vbhh-089 ~ ($20.)

************************************************************************

1966 HILBRE ~ SlpS ~ (2-Blade) BROADHEAD BLADE ~ #ABCC0639.000 ~ Length: 2.70" ~ (9) ~ Item # vbhh-090 ~ ($20.)

************************************************************************

1954 HILBRE ~ BARBED ~ (2-Blade) BROADHEAD  ~ #ABCC0637.000 ~ Length: 3.04" ~ (18) ~ Item # vbhh-091 ~ ($35.)

************************************************************************

1957 HILBRE ~ Semi-Barbed ~ (2-Blade) BROADHEAD ~ #ABCC0638.000 ~ Length: 3.01" ~ (5) ~ Item # vbhh-092 ~ ($30.)

************************************************************************

1959 HILBRE ~ Semi-Barbed (4-Blade) BROADHEAD  ~ #ABCC0639.000 ~ Length: 3.25" ~ (34) ~ Item # vbhh-093 ~ ($20.)

************************************************************************

1966 HILBRE ~ (4-Blade) BROADHEAD  ~ #ABCC0639.900 ~ Length: 2.93" ~ mx-5 ~ (71) ~ Item # vbhh-094 ~ ($15.)

************************************************************************

1966 HILBRE ~ (4-Blade) BROADHEAD  ~ #ABCC0640.000 ~ Length: 3.43" ~ mx-5 ~ (13) ~ Item # vbhh-095 ~ ($20.)

************************************************************************

1966 HILBRE ~ (4-Blade) BROADHEAD  ~ #ABCC0641.000 ~ Length: 3.55" ~ (4) ~ Item # vbhh-096 ~ $35.

************************************************************************

HILL'S HORNET Broadheads were designed and produced by Ralph Hill of Racine, Wisconsin during the early to mid 1950's ~

****    ****    ****    ****

1954 HILL'S HORNET ~ (2-Blade) BROADHEAD  ~ #ABCC0646.000 ~ Length: 2.39" ~ (16) ~ Item # vbhh-100 ~ ($25.)

************************************************************************

1954 HILL'S HORNET ~ (2-Blade) BROADHEAD  ~ #ABCC0647.000 ~ Length: 2.42" ~ (1) ~ Item # vbhh-101 ~ ($25.)

************************************************************************

1955 HILL'S HORNET ~ (2-Blade) BROADHEAD ~ #ABCC0648.000 ~ Length: 2.41" ~ (6) ~ Item # vbhh-102 ~ ($25.)

************************************************************************

1955 HILL'S HORNET ~ (2-Blade) BROADHEAD  ~ #ABCC0649.000 ~ Length: 2.42" ~ (5) ~ Item # vbhh-103 ~ ($25.)

************************************************************************

1950 HILL'S HORNET ~ (3-Blade) BROADHEAD  ~ #ABCC0651.000 ~ Length: 1.64" ~ (2) ~ Item # vbhh-105 ~ ($25.)

************************************************************************

1950 HILL'S HORNET BWS ~ (3-Blade) BROADHEAD ~ #ABCC0652.000 ~ Length: 1.70" ~ (5) ~ Item # vbhh-106 ~ ($25.)

************************************************************************ 

1950 HILL'S HORNET ~ (3-Blade) BROADHEAD ~ #ABCC0653.000 ~ Length: 1.89" ~ (4) ~ Item # vbhh-107 ~ ($25.)

************************************************************************

1950 HILL'S HORNET  BWS ~ (3-Blade) BROADHEAD ~ #ABCC0654.000 ~ Length: 1.87" ~ (18) ~ Item # vbhh-108 ~ ($25.)

************************************************************************

1950 HILL'S HORNET ~ (3-Blade) BROADHEAD  ~ #ABCC0655.000 ~ Length: 1.99" ~ (5) ~ Item # vbhh-109 ~ ($25.)

************************************************************************

1950 HILL'S HORNET BWS ~ (3-Blade) BROADHEAD  ~ #ABCC0656.000 ~ Length: 1.94" ~ (34) ~ Item # vbhh-110 ~ ($25.)

************************************************************************

1950 HILL'S HORNET BWS ~ (3-Blade) BROADHEAD ~ #ABCC0657.000 ~ Length: 1.92" ~ (4) ~ Item # vbhh-111 ~ ($25.)

************************************************************************

1950 HILL'S HORNET BWS ~ (3-Blade) BROADHEAD  ~ #ABCC0658.000 ~ Length: 2.12" ~ (5) ~ Item # vbhh-112 ~ $25.

************************************************************************

1950 HILL'S HORNET BWS ~ (3-Blade) BROADHEAD  ~ #ABCC0660.000 ~ Length: 2.12" ~ (7) ~ Item # vbhh-113 ~ ($30.)

************************************************************************

1951 HILL'S HORNET  Target ~ (3-Blade) BROADHEAD ~ #ABCC0664.000 ~ Length: 1.65" ~ (3) ~ Item # vbhh-116 ~ ($55.)

************************************************************************ 

1951 HILL'S HORNET  Target ~ (3-Blade) BROADHEAD ~ #ABCC0667.000 ~ Length: 1.75" ~ (1) ~ Item # vbhh-119 ~ ($45.)

************************************************************************ 

1995 HISER Lucky 7 (2-Blade) BROADHEAD  ~ #ABCC0668.542 ~ Length: 2.07" ~ (1) ~ Item # vbhh-126 ~ ($55.)

************************************************************************

2006 HISER Mini Trade Point ~ Brass ~ (2-Blade) BROADHEAD ~ Length: 1.79" ~ 107 Grain ~ (1) ~ Item # vbhh-128 ~ ($55.)

************************************************************************

1988 HOILAND ~ (2-Blade) BROADHEAD ~ #ABCC0669.000 ~ Length: 3.11" ~ (1) ~ Item # vbhh-130 ~ ($45.)

************************************************************************

HOWARD HILL of Sunland, California was one of the early Big Game Archery hunters, designing and hand-making his own big game broadheads, which made him famous by taking down 3 elephants with his bow on an African safari ~

****    ****    ****    ****  

 HOWARD HILL ~ (2-Blade) BARBED 'ELEPHANT HEAD' BROADHEAD  ~ Length: 4.40" ~ (Photo Below shows size compared to normal Howard Hill Broadhead) ~ mx-052 ~ Item # vbhh-133 ~ No Longer Available

************************************************************************

1958 HOWARD HILL ~ (2-Blade) BROADHEAD  ~ #ABCC0678.000 ~ Length: 3.02" ~ mx-33 ~ (6) ~ Item # vbhh-136 ~ ($55.)

************************************************************************

RARE  1958 HOWARD HILL SERRATED ~ 24 Serrations per inch ~ (2-Blade) BROADHEAD  ~ #ABCC0678.500 ~  Length: 2.98" ~ mx-15 ~ Item # vbhh-138 ~ ($65.) ~ * SOLD * ~

************************************************************************

1958 HOWARD HILL ~ (2-Blade) BROADHEAD ~ #ABCC0680.000 ~ Length: 3.32" ~ ~ mx-64 ~ (41) ~ Item # vbhh-139 ~ ($55.)

***********************************************************************

EXTREMELY RARE ~1958 HOWARD HILL BARBED ~ (2-Blade) BROADHEAD ~ #ABCC0682.000 ~ Length: 3.34" ~ mx-04 ~ (1) ~ Item # vbhh-141 ~ ($175.)

******************************************************************

1955  HOWARD HILL BARBED (2-Blade) BROADHEAD ~ #ABCC0185.000 ~ Length: 3.04" ~ Manufactured by Ben Pearson ~ Item # vbhb-036 ~ ($100.)

***********************************************************************

1986 JERRY HILL ~ (2-Blade) BROADHEAD  ~ #ABCC0746.000 ~ Length: 3.33" ~ mx-74 ~ (2) ~ Item # vbhh-142 ~ ($45.)

************************************************************************

HOYT Broadheads were manufactured by the famous archer and archery manufacturer Earl Hoyt during 1957.  Patent # 2,905,470 was granted for the unique small game broadhead shown below on September, 1959 ~

****    ****    ****    ****

1957 HOYT (EARL) ~ (Triangle) Small Game BROADHEAD ~ Patent # 2,905,470 ~ Length: 1.51"/154" ~ 142 Grain ~ (3) ~ Item # vbhh-146 ~ ($35.)

************************************************************************

HOYT Magnum Small Game Point ~ Length: 1.60" ~ 125 Grain ( 1) ~ ITEM # vbhh-147 ~ ($25.)

**************************************************************************

 

1989 HOYT Shortcut ~ (4-Blade) Batwing BROADHEAD ~ #ABCC0693.000 ~ Length: 1.84" ~ (2) ~ Item # vbhh-149 ~ ($55.)

************************************************************************

HUGH RICH and PHIL LUTHER designed and made the following 2-piece, spot-welded broadhead as partners in 1941.  Metal was extremely difficult to come by during this time due to World War II.  Around 1945 the partnership was dissolved, and Phil Luther took over the business, refining the quality of the broadhead that became known as the 'Lutherpoint', which are posted further down this page ~

****    ****    ****    **** 

RARE  1941 HUGH RICH / PHIL LUTHER ~ (2-Blade) BROADHEAD  ~ #ABCC0694.000 ~ Length: 2.62" ~ (13) ~ Item # vbhh-152 ~ ($50.)

************************************************************************

RICH HUGH of Burbank, California created the following rubber, movie prop broadhead (shown below), in 1950 for the Hollywood movie studios.  Rich was often hired as a consultant for archery related movies & TV series, producing and selling  these rubber arrowheads for the various archery scenes ~

****    ****    ****    ****

1950 HUGH RICH Smooth Rubber Movie Prop Head ~ (2-Blade) BROADHEAD ~ Length: 1.95" ~ mx-03 ~ (1) ~ Item # vbhh-154 ~ ($45.)

************************************************************************

1982 HUNTER'S EDGE ~ (2-Blade) BROADHEAD  ~ #ABCC0697.000 ~ Length: 3.12" ~ 139 Grain ~ (3) ~ Item # vbhh-157 ~ ($45.)

************************************************************************

1985 HUNTER'S EDGE ~ (2-Blade) BROADHEAD  ~ #ABCC0698.000 ~ Length: 3.10" ~ 145 Grain ~ (1) ~ Item # vbhh-158 ~ ($45.)

************************************************************************

1975 HUNTER'S HEAD ~ (2-Blade) BROADHEAD  ~ #ABCC0706.000 ~ Length: 3.09" ~ 137 Grain ~ (1) ~ Item # vbhh-163 ~ ($35.)

************************************************************************

INDIAN ARCHERY CO. - Evansville, Indiana ~

****    ****    ****    ****

1946 INDIAN ARCHERY ~ (2-Blade) BROADHEAD  ~ #ABCC0710.000 ~ Length: 2.41" ~ (4) ~ Item # vbhi-001 ~ ($150.)

************************************************************************

1946 INDIAN ARCHERY ~ (2-Blade) BROADHEAD  ~ #ABCC0711.000 ~ Length: 2.50" ~ mx-14 ~ (14) ~ Item # vbhi-002 ~ ($125.)

***********************************************************************

Scarce 1969 INDIAN ARCHERY BLEEDER ~ (4-Blade) BROADHEAD ~ #ABCC0715.000 ~ Length: 2.85" ~ mx-14 ~ (1) ~ Item # vbhi-006 ~ ($150.)

*************************************************************************

1969 INDIAN ARCHERY BLEEDER ~ (4-Blade) BROADHEAD ~ #ABCC0716.000 ~ Length: 2.87" ~ mx-04 ~ (2) ~ Item # vbhi-007 ~ ($100.)

************************************************************************

IVANHOE Broadheads were made and sold by Ivanhoe Sporting & Manufacturing Co. of Ludington, Michigan during the 1940's ~

****    ****    ****    ****

1946 IVANHOE ~ (2-Blade) BROADHEAD  ~ #ABCC0731.000 ~ Length: 2.36" ~ 146 Grain ~ mx-42 ~ (2) ~ Item # vbhi-025 ~ ($55.)

************************************************************************

JACK HOWARD of Nevada City, California, famed as one of the most proficient bowmen of the 1950's manufactured some of the most unique and deadly big game broadheads ever produced.  Using actual razor heads, and several different existing quality broadheads such as the 1949 Bod-kin, the 1950 Ma- 3-L's, the 1960 Hi-Precision and 1960 Black Copperheads, Jack would ground down the razor blades to the proper shape, and glued & clamp them in place on the various broadheads of choice with Pilo-Bond.  The individually hand-made Broadheads soon became recognized for superior performance due to their wider than normal cutting widths ~

****    ****    ****    ****

1960 JACK HOWARD ~ (Razor Modified 4-Blade made from a 1960 Black Copperhead) BROADHEAD  ~ #ABCC0742.000 ~ Length: 2.38" ~ mx-4 ~ (1) ~ Item # vbhj-005 ~ ($45.)

************************************************************************

1960 JACK HOWARD ~ (Razor Modified 3-Blade made from a 1960 Hi-Precision H-5) ~  BROADHEAD ~ Length: 2.20" ~ 139 Grain ~ mx-4 ~ (2) ~ Item # vbhj-006 ~ ($45.)

************************************************************************

1955 JACK HOWARD ~ (Razor Modified 3-Blade made from a 1950 M-A 3-L) ~  BROADHEAD ~ Length: 2.25" ~ 145 Grain ~ (1) ~ Item # vbhj-007 ~ ($55.)

************************************************************************

1987 KOBRA X Caliber ~ 2-Blade BROADHEAD BLADE ~ Length: 2.92" ~ (1) ~ Item # vbhk-009 ~ ($25.)

************************************************************************

1988 KOBRA X Caliber ~ 2-Blade BROADHEAD BLADE ~ Length: 2.75" ~ (1) ~ Item # vbhk-010 ~ ($25.)

************************************************************************

WILFORD LaFOND of Lapeer, Michigan made several different designs of Broadheads during the 1950's and 1960's ~

****    ****    ****    ****

1952 LaFOND'S Lightning 2 ~ (2-Blade) BROADHEAD  ~ #ABCC0769.000 ~ Length: 2.03" ~ 87 Grain ~ (9) ~ Item # vbhl-006 ~ ($45.)

************************************************************************

1952 LaFOND'S Lightning 2 ~ (2-Blade) BROADHEAD  ~ #ABCC0769.200 ~ Length: 2.38" ~ 121 Grain ~ (1) ~ Item # vbhl-007 ~ ($45.)

************************************************************************

1952 LaFOND'S Lightning 2 ~ (2-Blade) BROADHEAD ~ #ABCC0769.300 ~ Length: 2.34" ~ 130 Grain ~ (1) ~ Item # vbhl-008 ~ ($45.)

************************************************************************

1952 LaFOND'S Lightning 2 ~ (2-Blade) BROADHEAD ~ #ABCC0769.400 ~ Length: 2.37" ~ 126 Grain ~ (1) ~ Item # vbhl-009 ~ ($45.)

************************************************************************

1952 LaFOND'S Lightning 2 ~ (2-Blade) BROADHEAD  ~ #ABCC0770.000 ~ Length: 2.33" ~ 126 Grain ~ (19) ~ Item # vbhl-010 ~ ($45.)

************************************************************************

1952 LaFOND'S Lightning 2 ~ (2-Blade) BROADHEAD  ~ #ABCC0770.100 ~ Length: 2.27" ~ 122 Grain ~ (1) ~ Item # vbhl-011 ~ ($45.)

************************************************************************

1959 LaFOND'S Lightning 4 ~ (4-Blade) BROADHEAD  ~ #ABCC0773.500 ~ Length: 2.33" ~ (1) ~ Item # vbhl-019 ~ ($55.)

************************************************************************

1959 LaFOND'S Lightning 4 ~ (4-Blade) BROADHEAD ~ #ABCC0775.000 ~ Length: 2.41" ~ (1) ~ Item # vbhl-021 ~ ($55.)

************************************************************************

1952 LaFOND'S Ripper ~ (2-Blade) BROADHEAD  ~ #ABCC0776.000 ~ Length: 2.01" ~ 97 Grain ~ mx-42 ~ (2) ~ Item # vbhl-022 ~ ($75.)

************************************************************************

1952 LaFOND'S Ripper ~ (2-Blade) BROADHEAD  ~ #ABCC0778.000 ~ Length: 2.35" ~ 117 Grain ~ mx-53 ~ (3) ~ Item # vbhl-027 ~ ($85.)

************************************************************************

LITTLE SHAVER Broadheads were designed and patented by Wendell Brooks of Dearborn, Michigan in 1957, being the first replaceable blade broadheads to accept a full size single injector blade ~

****    ****    ****    ****

1957 LITTLE SHAVER ~ (2-Blade) BROADHEAD ~ #ABCC0790.000 ~ Length: 2.62" ~ mx-33 ~ (21) ~ Item # vbhl-046 ~ ($45.)

***********************************************************************

1957 LITTLE SHAVER ~ (3-Blade) BROADHEAD  ~ #ABCC0792.000 ~ Length: 2.70" ~ mx-13 ~ (12) ~ Item # vbhl-047 ~ ($55.)

***********************************************************************

1957 LITTLE SHAVER with Ridge above Ferrule ~ (3-Blade) BROADHEAD  ~ #ABCC0793.000 ~ Length: 2.70" ~ mx-33 ~ (17) ~ Item # vbhl-048 ~ ($55.)

***********************************************************************

The LUTHERPOINT Broadheads were produced by Phil Luther of Los Angeles, California in 1946 ~

****    ****    ****    ****

1946 LUTHERPOINT ~ (2-Blade) BROADHEAD  ~ #ABCC0807.000 ~ Length: 2.85" ~ 2.03" Ferrule ~ 163 Grain ~ mx-8 ~ (1) ~ Item # vbhl-058 ~ ($55.)

************************************************************************

1946 LUTHERPOINT ~ (2-Blade) BROADHEAD  ~ #ABCC0808.200 ~ Length: 2.62" ~ 2.1" Ferrule ~ 142 Grain ~ mx-06 ~ (1) ~ Item # vbhl-060 ~ ($55.)

************************************************************************

1946 LUTHERPOINT ~ (2-Blade) BROADHEAD ~ #ABCC0808.300 ~ Length: 2.72" ~ 2.18" Ferrule ~ 150 Grain ~ mx-51 ~ (4) ~ Item # vbhl-061 ~ ($55.)

************************************************************************

1946 LUTHERPOINT ~ (2-Blade) BROADHEAD  ~ #ABCC0808.400 ~ Length: 2.79" ~ 2.18" Ferrule ~ 155 Grain ~ mx-51 ~ (13) ~ Item # vbhl-062 ~ ($55.)

************************************************************************

1946 LUTHERPOINT ~ (2-Blade) BROADHEAD ~ #ABCC0808.500 ~ Length: 2.79" ~ 2.23" Ferrule ~ 161 Grain ~ mx-11 ~ (2) ~ Item # vbhl-063 ~ ($55.)

************************************************************************

1946 LUTHERPOINT ~ (2-Blade) BROADHEAD  ~ #ABCC0808.600 ~ Length: 2.81" ~ 2.20" Ferrule ~ 159 Grain ~ (1) ~ Item # vbhl-064 ~ ($55.)

************************************************************************

M-A 3 Broadheads were manufactured by the Make-All Tool and Die Co. of West Allis, Wisconsin during the 1940's.  Harry Rose, who jointly owned the company with Dan Roknich, was a very serious and avid bowman, which stirred the interest for him to create and improve a broadhead design.  The broadhead that was produced was named the Bod-kin, and the company partnered with L.C. Whiffen Archery Company of Milwaukee, Wisconsin to sell the broadheads.  During the late 1940's the partnership was dissolved.  Whiffen introduced a version of the Bod-kin, and in May 1957, Make-All Tool and Die Co. produced a 2-Blade Broadhead, and continued to manufacture the original style of 3-Blade Broadheads with only a few minor modifications... changing the name from BOD-KIN to M-A 3-BLADE, of which these broadheads were plated with a new iridized, non-glare, rust-resistant finish ~

****    ****    ****    ****

1957 M-A 2 ~ manufactured by Make-All Tool and Die Co. ~ (2-Blade) BROADHEAD ~ #ABCC0809.000 ~ Length: 2.26" ~ (4) ~ Item # vbhm-001 ~ ($25.)

***********************************************************************

1957 M-A 2 ~ manufactured by Make-All Tool and Die Co. ~ (2-Blade) BROADHEAD ~ #ABCC0810.000 ~ Length: 2.41" ~ (4) ~ Item # vbhm-002 ~ ($25.)

***********************************************************************

1957 M-A 2 ~ manufactured by Make-All Tool and Die Co. ~ (2-Blade) BROADHEAD ~ #ABCC0811.000 ~ Length: 2.59" ~ mx-4 ~ (136) ~ Item # vbhm-003 ~ ($20.)

***********************************************************************

1957 M-A 2 ~ manufactured by Make-All Tool and Die Co. ~ (2-Blade) BROADHEAD ~ #ABCC0812.000 ~ Length: 2.73" ~ (383) ~ Item # vbhm-004 ~ ($20.)

***********************************************************************

1949 M-A 3-Blade ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0813.000 ~ Length: 2.18" ~ (21) ~ Item # vbhm-005 ~ ($25.)

***********************************************************************

1950 M-A 3-Blade ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0814.000 ~ Length: 2.23" ~ (9) ~ Item # vbhm-006 ~ ($25.)

***********************************************************************

1954 M-A 3-S ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0815.000 ~ Length: 1.98" ~ (5) ~ Item # vbhm-007 ~ ($35.)

***********************************************************************

1954 M-A 3-S ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0816.000 ~ Length: 1.97" ~ (2) ~ Item # vbhm-008 ~ ($35.)

***********************************************************************

1954 M-A 3-S ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0817.000 ~ Length: 2.00" ~ (283) ~ Item # vbhm-009 ~ ($20.)

***********************************************************************

1954 M-A 3-L ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0817.500 ~ Length: 2.17" ~ (7) ~ Item # vbhm-010 ~ ($35.)

***********************************************************************

1950 M-A 3-L  manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0818.000 ~ Length: 2.22" ~ (44) ~ Item # vbhm-011 ~ ($25.)

***********************************************************************

1954 M-A 3-L ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0819.000 ~ Length: 2.26" ~ (38) ~ Item # vbhm-012 ~ ($25.)

***********************************************************************

1990 M-A 3-125S ~ manufactured by Make-All Tool and Die Co. ~ (3-Blade) BROADHEAD ~ #ABCC0819.100 ~ Length: 2.27" ~ (2) ~ Item # vbhm-013 ~ ($35.)

***********************************************************************

MAGNUM Broadheads were manufactured by Mohawk Archery Products of Rome, New York during the 1970's, and considered by most archery enthusiasts to be some of the most sturdy constructed broadheads ever produced ~

****    ****    ****    ****

1971 MAGNUM I ~ (4-Blade) BROADHEAD ~ #ABCC0820.000 ~ Length: 2.61" ~ mx-6 ~  (6) ~ Item # vbhm-016 ~ ($45.)

***********************************************************************

1973 MAGNUM II ~ (4-Blade) BROADHEAD ~ #ABCC0821.000 ~ Length: 2.41" ~ mx-8 ~ (1) ~ Item # vbhm-017 ~ ($45.)

***********************************************************************

1973 MAGNUM II ~ (4-Blade) BROADHEAD ~ #ABCC0822.000 ~ Length: 2.51" ~ mx-6 ~ (4) ~ Item # vbhm-018 ~ ($45.)

***********************************************************************

1976 MAGNUM II ~ (4-Blade) BROADHEAD ~ #ABCC0823.000 ~ Length: 2.41" ~ (6) ~ Item # vbhm-019 ~ ($45.)

************************************************************************

1985 MAGNUS 4 ~ (4-Blade) BROADHEAD ~ #ABCC0824.000 ~ Length: 2.48" ~ 149 Grain ~ mx-6 ~ (1) ~ Item # vbhm-023 ~ ($45.)

***********************************************************************

1996 MAGNUS 4 ~ (4-Blade) BROADHEAD ~ #ABCC0829.150 ~ Length: 2.42" ~ 124 Grain ~ (1) ~ Item # vbhm-035 ~ ($45.)

***********************************************************************

1995 MAGNUS 2 ~ (2-Blade) BROADHEAD ~ #ABCC0829.210 ~ Length: 2.43" ~ 105 Grain ~ (1) ~ Item # vbhm-037 ~ ($45.)

***********************************************************************

1994 MAGNUS 2 ~ (2-Blade) BROADHEAD ~ #ABCC0829.300 ~ Length: 2.32" ~ 110 Grain ~ (1) ~ Item # vbhm-039 ~ ($45.)

***********************************************************************

1999 MAGNUS Journeyman ~ (2-Blade) BROADHEAD ~ #ABCC0829.440 ~ Length: 2.34" ~ 158 Grain ~ (4) ~ Item # vbhm-047 ~ ($45.)

***********************************************************************

Vintage (Date Unknown) MARTIN Eagle ~ Concave (2-Blade) BROADHEAD ~ Length: 3.00" (2) ~ Item # vbhm-048 ~ ($45.)

***********************************************************************

1981 MAXI Serrated ~ (2-Blade) BROADHEAD ~ #ABCC0847.500 ~ Length: 3.14" ~ 177 Grain ~ (0) ~ Item # vbhm-055 ~ (SOLD)

***********************************************************************

1981 MAXI  Serrated ~ (2-Blade) BROADHEAD ~ #ABCC0848.000 ~ Length: 3.22" ~ 186 Grain ~ (1) ~ Item # vbhm-056 ~ ($45.)

***********************************************************************

The famous MICKEY FINN Broadhead was manufactured by Glenn St. Charles of Seattle, Washington in the early 1950's, who founded the legendary archery Pope & Young Club ~

****    ****    ****    ****

RARE ~ 1953 MICKEY FINN ~ (2-Blade) BROADHEAD ~ #ABCC0857.000 ~ Length: 2.65" ~ 177 Grain ~ mx-802 ~ (4) ~ Item # vbhm-059 ~ ($195.)

***********************************************************************

The MISSILE SPIKE Broadhead was designed and patented by C.F. Carroll of Parma, Ohio during the early 1970's, who made his first arrowhead in 1938 when he was 12 years old ~

****    ****    ****    ****

1971 MISSILE SPIKE ~ (4-Blade) BROADHEAD ~ #ABCC0862.000 ~ Length: 2.33" ~ (0) ~  Item # vbhm-061 ~ (SOLD)

***********************************************************************

1972 MISSILE SPIKE ~ (4-Blade) BROADHEAD ~ #ABCC0863.000 ~ Length: 2.32" ~ (5) ~ Item # vbhm-062 ~ ($25.)

***********************************************************************

1972 MISSILE SPIKE ~ (4-Blade) BROADHEAD ~ #ABCC0864.000 ~ Length: 2.34" ~ (12) ~ Item # vbhm-063 ~ ($25.)

***********************************************************************

Vintage (Date Unknown) MISSILE SPIKE w/Molded Screw Insert ~ (4-Blade) BROADHEAD ~ Length: 1.90" / 2.70" overall Length ~ (14) ~ Item # vbhm-064 ~ ($25.)

***********************************************************************

The MOHAWK mechanical Broadhead was designed and patented by Walter Vance of Elyria, Ohio during the 1950's.  Walter's design consisted of two hinged blades that swiveled forward for flight to reduce wind planning, opening to a width of over 2 inches upon impact ~

****    ****    ****    ****

1956 MOHAWK Swivel Action ~ Shown in position upon impact ~ (2-Blade) BROADHEAD ~ #ABCC0883.000 ~ Length: 2.70" ~ (3) ~ Item # vbhm-067 ~ ($75.)

************************************************************************

1957 MOHAWK Swivel Action ~ shown in position for flight ~ (2-Blade) BROADHEAD ~ #ABCC0884.000 ~ Length: 3.70" (5) ~ Item # vbhm-068 ~ ($55.)

************************************************************************

MOWOC Broadheads were an extremely well made, solid 3-bladed broadhead that was produced by the Mowoc Company of Oconomowoc, Wisconsin in 1960 ~

****    ****    ****    ****

1960 MOWOC ~ (3-Blade) BROADHEAD ~ #ABCC0885.000 ~ Length: 2.27" ~ mx-82 ~ (8) ~ Item # vbhm-071 ~ ($35.)

************************************************************************

2005 MUIRHEAD Molded ~ (3-Blade) BROADHEAD ~ #ABCC0885.300 ~ Length: 2.00" ~ (1) ~ Item # vbhm-074 ~ ($45.)

***********************************************************************

****    ****    ****    ****